resolution

Resolutions-1997-021

Dated December 10, 1997 96 pages Res. 1997-021, Res. 2007-060

Open the PDF Searchable (OCR) PDF

Page 92 of 96

Text read by the vision model; check the PDF for anything that matters.
14 – PARKING REQUIREMENTS 14.01 Off-Street Parking Requirements A. The installation of all parking shall comply with the standards described herein as well as the requirements of the Zoning Ordinance. All required parking shall be provided on private property. On-street parking may not be counted for meeting the parking requirements listed in the Zoning Ordinance. B. These standards are intended to serve as a supplement to the regulations located in the City of Tiffin Zoning Ordinance. The Zoning Ordinance regulations include, but are not limited to, provisions for: the required number of parking spaces for a particular use, the parking of recreational vehicles, and the use of off-site parking. The City of Tiffin Zoning Ordinance should be consulted in conjunction with these Parking Standards adopted by the City Council. C. After the installation of a commercial parking lot in conformance with specified requirements, parking areas may be restriped to meet the needs of the property owner providing that no area originally devoted to parking, landscaping, fire lane easements, or access aisles be altered. D. Required Minimum Sizes of Parking Spaces, Driveways and Aisle Widths. 1. The following standards are applicable to parking areas utilizing 90° parking stalls: <table> <tr> <th>Type</th> <th>Size</th> <th>Required Aisle Width</th> </tr> <tr> <td>Standard</td> <td>9'-0" X 19'-0"</td> <td>25'-0"</td> </tr> </table> 2. The following standards are applicable to parking areas utilizing angled parking stalls: <table> <tr> <th>Parking Stall Angle</th> <th colspan="2">Required Aisle Width</th> </tr> <tr> <td></td> <td>One Way</td> <td>Two Way</td> </tr> <tr> <td>60°</td> <td>17'-0"</td> <td>20'-0"</td> </tr> <tr> <td>45°</td> <td>13'-0"</td> <td></td> </tr> </table> 3. The following standards are applicable to parallel parking spaces: <table> <tr> <th>Type</th> <th>Size</th> </tr> <tr> <td>Standard</td> <td>8'-0" X 23'-0"</td> </tr> </table> 4. Parking spaces bounded on a side by a post, wall, or fence more than 1 foot in height shall be increased in width by 1 foot, measured from the face of the obstruction.

Sources

  • laserfiche: Resolutions-1997-021 (Resolutions-1997-021.pdf) — where it was found ↗ first seen Oct 12, 2026

This document's details as JSON

Data last updated October 17, 2026. Built from the archive's documents; see how the data is built.