Resolutions-1997-021

10 – EROSION CONTROL 10.01 APPROVALS AND PERMITS A. Erosion control plans must be certified by a professional engineer registered in the State of Iowa B. Erosion control plans must be reviewed and approved by the City Engineer prior to any construction. C. Other local, state and federal permits may be required, depending on the circumstances. It shall be the responsibility of the Engineer of Record to acquire all applicable permits. A copy of all permits shall be provided to the City Engineer before construction. 10.02 THRESHOLDS A. Residential developments consisting of subdivisions and resubdivisions larger than one acre in size will require an erosion control plan. B. Commercial and industrial developments greater than one acre in size will require an erosion control plan. 10.03 REQUIREMENTS A. Erosion control plans shall be designed with the following general goals in mind: 1. To protect the site from the significant loss of soil and top soil due to erosion. 2. To protect downstream properties and facilities from the deposition of sediments. 3. To protect onsite facilities and public improvements from damages due to erosion. 4. To protect water quality. B. The erosion control plans will designate an individual, including name, title, address and phone number, to be responsible for the following duties throughout the duration of the project: 1. Initial installation of the erosion control measures specified by the erosion control plan. 2. Site inspections on a weekly basis and after rains greater than ¼ inch to assess the effectiveness of existing erosion control measures and to direct installation of additional erosion control measures in response to problems noted during said inspections. The designated individual will keep a log of the inspections and any corrective measures taken. No inspections are required while the ground is frozen or there is snow cover. Inspections will resume when the snow begins to melt.