Approval of Change Order #3 – Tricon Construction Group – Water Treatment Facility Upgrade — E-3

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. <table> <tr> <th>Series</th> <th>Length</th> <th>Nominal lumens</th> <th>Diffuser</th> <th>Distribution</th> <th>Voltage</th> <th>Driver</th> <th>Color temperature</th> <th>Color rendering index</th> </tr> <tr> <td>DMW2 LED wet location</td> <td>L24 24"</td> <td>2000LM 2,000 lumens<br>3000LM 3,000 lumens<br>4000LM 4,000 lumens</td> <td>ACL Acrylic<br>AFL Frosted acrylic<br>PCL Polycarbonate<br>PFL Frosted Polycarbonate</td> <td>MD Medium distribution<br>WD Wide distribution</td> <td>MVOLT 120-277V<br>120 120V<br>208 208V<br>240 240V<br>277 277V<br>347 347V<br>480 480V</td> <td>GZ10 0-10V Dimming</td> <td>30K 3000 K<br>35K 3500 K<br>40K 4000 K<br>50K 5000 K</td> <td>80CRI 80 CRI<br>90CRI 90 CRI</td> </tr> </table> Options <table> <tr> <th>E10W</th> <td>IOTA 10W emergency battery pack, Constant Power, Certified in CA Title 20 MAEDBS, Self-diagnostic (LINK) ‡</td> <td>CS88</td> <td>6' Brad Harrison 16/3 cord and straight blade plug set, NEMA 4X rated ‡</td> <td>MS110NL</td> <td>Low mount 360 integral motion sensor, wet location, On/Off operation ‡</td> </tr> <tr> <th>PMP4X</th> <td>Pendant monopoint with NEMA4X fitting (not available with JSB option) ‡</td> <td>CS88L12</td> <td>12' Brad Harrison 16/3 cord and straight blade plug set, NEMA 4X rated ‡</td> <td>MS1102L3VWL</td> <td>Low mount 360 integral motion sensor, wet location, High/Low operation (3 level) ‡</td> </tr> <tr> <th>WLFEND</th> <td>Wet location fitting (fittings out end only) ‡</td> <td>CS88R</td> <td>Brad Harrison receptacle, NEMA 4X rated ‡</td> <td>MS110NL DSCNWL</td> <td>low mount 360 integral motion sensor, wet location, On/Off operation for motion sensing, override Off due to daylight ‡</td> </tr> <tr> <th>WLFEND2</th> <td>Wet location fitting (fittings out both ends) ‡</td> <td>NOM</td> <td>Nom certified</td> <td>NLTAIR2 RS80R10</td> <td>nLight AIR Generation 2 enabled 360° low mount motion sensor ‡</td> </tr> <tr> <th>JSB</th> <td>Junction box snap-bracket ‡</td> <td>TPS</td> <td>TorxT10 tamper-resistant screws</td> <td></td> <td></td> </tr> <tr> <th>QMB</th> <td>Quick-mount ceiling bracket ‡</td> <td>STS1</td> <td>Stainless steel latches</td> <td></td> <td></td> </tr> <tr> <th>CS89</th> <td>6' white cord, 16/3, no plug, wet location ‡</td> <td>SPD</td> <td>10KV surge protection device ‡</td> <td></td> <td></td> </tr> <tr> <th>CS89L12</th> <td>12' white cord, 16/3, no plug, wet location ‡</td> <td>BAA</td> <td>Buy America(n) Act and/or Build America Buy America Qualified</td> <td></td> <td></td> </tr> </table> NOTE: ‡ indicates option chosen has ordering restrictions. Please reference ordering restrictions chart. Options are sorted alphabetically. Accessories: Order as separate catalog number. <table> <tr> <th>RK1 T10BIT W/PIN U</th> <td>Hex-base driver bit, Torx TX10, for tamper-resistant screws with center reject pin</td> </tr> <tr> <th>DMW2WLF</th> <td>Wet location fitting</td> </tr> <tr> <th>DMW2QMB</th> <td>Quick-mount ceiling bracket</td> </tr> </table> Option Value Ordering Restrictions <table> <tr> <th>Option value</th> <th>Restriction</th> </tr> <tr> <td>CS88, CS88L12</td> <td>Receptacle only. Not available with E10W option.</td> </tr> <tr> <td>CS88R</td> <td>Receptacle only. Not available with E10W option.</td> </tr> <tr> <td>CS89, CS89L12</td> <td>Not available with other cord sets. Not available with E10W option.</td> </tr> <tr> <td>E10W</td> <td>Not available with JSB, PMP4X mounting options. Not available with CS88 cord sets or CS88R receptacle. Must specify voltage. Not available with 347, 480V. Maximum ambient temperature 25°C.</td> </tr> <tr> <td>JSB</td> <td>Not available with other mounting options.</td> </tr> <tr> <td>MS1102L3VWL, MS110NL DSCNWL</td> <td>Not available with other external MSI sensors or WLFEND2. Must specify voltage.</td> </tr> <tr> <td>MS110WL</td> <td>Not available with other external MSI sensors or WLFEND2. Must specify voltage.</td> </tr> <tr> <td>NLTAIR2 RS80R10</td> <td>Not available with other external MSI sensors or WLFEND2. Normal luminaires (non-emergency) can be used as a normal power sensing device for nearby nLight AIR devices and luminaires with EM emergency options.</td> </tr> <tr> <td>PMP4X</td> <td>Not for field install. Not available with PS1050 option. Not available with QMB, JSB mounting options.</td> </tr> <tr> <td>QMB</td> <td>Not available with other mounting options.</td> </tr> <tr> <td>Series</td> <td>Plastic latches supplied as standard. Provided with 2X KO plugs at both ends.</td> </tr> <tr> <td>SPD</td> <td>Not available with MS110NL, MS1102L3VWL, MS110NL DSCNWL, NLTAIR2 RS80R10.</td> </tr> <tr> <td>WLFEND</td> <td>Not available with WLFEND2. Not available with cordsets or sensors.</td> </tr> <tr> <td>WLFEND2</td> <td>Not available with WLFEND, cord sets, or MSI sensors.</td> </tr> </table>