Minutes-9/1/2016

conformity with any conditions set the City as conditions for its approval. Amendments to approved plans and specifications for a PAD may be obtained only by following procedures here outlined for first approval. H. 6. The building official will not issue any permit for any proposed building, structure, or use within the project unless said permit application conforms with the approved site and building plans. proposal accords with the approved development plan. I. 7. Compliance with the regulations of this chapter does not excuse the developer from the applicable requirements of the subdivision ordinance, except any modifications authorized in the approval of the application for the PAD. PAD .11 SITE AND BUILDING PLAN REVIEW A. It is the intent of this section that site and building plans for a PAD are prepared by a designer having professional competence in urban planning. The City Council may require the applicant to shall engage a qualified designer. B. A PAD Site plan shall comply with and include the following information: 1. Drawn at a scale of not less than one inch to forty feet (1" = 40'), written and graphic. 2. Date, compass point, legend of symbols. 2. Legal description including total area of property. 3. Address of the property, if assigned. 4. The name, address and contact information for the legal property owner and applicant, if different from the legal property owner. 5. Vicinity map that identifies the location of the property in relationship to the neighborhood or the rest of the city. 6. Existing zoning district designation and proposed use. 7. Property boundary lines including dimensions to the nearest one-tenth of 1 foot. 8. Existing and proposed topography at contour intervals of not more than 1 foot, extending beyond the boundaries of the site to adjacent properties as necessary to address drainage issues. 9. Location of any established floodways, floodway fridge, and flood plain overlay lines, if applicable. 10. Location of existing trees, identifying those that will be preserved. 11. Location of existing and proposed utilities, public and private. 12. Location of existing and proposed easements, public and private. 13. Location, footprint, size and use of all buildings and structures, existing and proposed with setback lines. C. A PAD Building Plan shall include the following information: