Ordinances-2002-255

entertainer is in such attire, costume or clothing to expose to view any specified anatomical area or while performing any entertainment. 6. No entertainer shall solicit, demand or receive any payment or gratuity from any customer for any act prohibited by this ordinance. 7. No entertainer shall receive any payment or gratuity from any customer for any act prohibited by this ordinance. C. At any sexually-oriented business, the following are required: 1. A sign, on which upper-case letters are at least two (2) inches high and lower-case letters are at least one (1) inch high, shall be conspicuously displayed in the common area at the principal entrance and shall read as follows: THIS ADULT ENTERTAINMENT BUSINESS IS REGULATED BY THE CITY OF TIFFIN, IOWA. ENTERTAINERS ARE: 1. Not permitted to engage in any type of sexual conduct on the premises or in prostitution; 2. Not permitted to be unclothed or in such less than opaque and complete attire, costume or clothing so as to expose to view any portion of the breasts below the top of the areola, or any portion of the pubic region, buttocks and/or genitals. 3. Not permitted to receive any payment or gratuity from any customer. 2. Neither entertainment nor any photograph, drawing, sketch or other pictorial or graphic representation thereof displaying any specified anatomical area shall be visible from a public place. 3. The premises shall be equipped with overhead lighting of sufficient intensity to illuminate every place to which customers are permitted access at an illumination of not less than one foot-candle as measured at the floor level, and such illumination must be maintained at all times that any customer is present in or on the premises. Section 4. Permit Required. A. It is unlawful for a person to operate a sexually-oriented business without a valid permit issued by the City of Tiffin’s designated Director, as provided by resolution of the City of Tiffin City Council. B. An application for a permit must be made on a form provided by the City. The application must be accompanied by a sketch or a diagram showing the configuration of the