ordinance
Ordinances-1995-197
Page 36 of 40
Text read by the vision model; check the PDF for anything that matters.shown on the plat, as well as the outer boundaries of the subdivided lands.
F) All distance, bearing, curve, and other survey data, as required by Chapter 355, Code of Iowa.
G) All adjoining properties shall be identified, and where such adjoining properties are a part of a recorded subdivision, the name of the subdivision shall be shown. If the subdivision platted is part of a previously recorded subdivision, sufficient ties shall be shown to controlling lines appearing on the earlier plat to permit an overlay to be made.
H) Street names and clear designation of public alleys.
I) Block and lot numbers.
J) Accurate dimensions for any property to be dedicated or reserved for public use, and the purpose for which such property is dedicated or reserved for public use.
K) The purpose of any easement shown on the plat shall be confined to only those easements pertaining to public utilities including gas, power, telephone, cable television, water, sewer; easements for trails, bikeways, ingress and egress; and such drainage easements as are deemed necessary for the orderly development of the land encompassed within the plat.
L) All interior excepted parcels, clearly indicated and labeled, "not a part of this plat."
M) A strip of land shall not be reserved by the subdivider unless the land is of sufficient size and shape to be of some practical use or service as determined by the Governing Body.
N) The minimum unadjusted acceptable error of closure for all subdivision boundaries shall be 1:10,000 and shall be 1:15,000 for any individual lot.
O) A statement by a registered land surveyor that the plat was prepared by the surveyor or under the surveyor's
Sources
- laserfiche: Ordinances-1995-197 (Ordinances-1995-197.pdf) — where it was found ↗ first seen Oct 12, 2026
Data last updated October 16, 2026. Built from the archive's documents; see how the data is built.