Ordinances-1995-197

and the extension of such streets into adjoining unplatted areas. Where a plat encompasses the location for an arterial or collector street proposed in the Community Development Plan or the Street Plan, the plat shall provide for such street. 2). Street grades shall align to existing streets, and all grades for streets shall be as approved by the City. 3) Arterial streets shall be located so as to not require direct access from the arterial street to abutting lots. 4) Street right-of-way widths and pavement widths shall be as specified in the technical standards for public improvements. 5) Half-streets are prohibited, except, where an existing platted half-street abuts the subdivision, a platted half-street to complete the street shall be required. 6) Local streets should be designed to discourage through traffic while safely connecting to collector or arterial streets. 7) Street jogs with centerline offsets of less than (125) one hundred twenty five feet shall be prohibited, except where topography, or other physical conditions make such jogs unavoidable. 8) Streets shall intersect as nearly at right angles as possible; and no street shall intersect any other street at less than sixty (60) degrees. 9) At intersections of major streets, and otherwise as necessary, lot corners abutting the intersection shall be rounded with a radius sufficient to provide necessary space within the right-of-way for sidewalks, traffic control devices, and other necessary improvements without encroachment onto the corner lots.