Page 5 of 8
Text read by the vision model; check the PDF for anything that matters.SECTION 17. Lot Requirements. The following lot sizes shall be required for each district as follows and in addition, each lot shall have front, side and rear yards not less than the following depth and width per district:
R1 District
Lot size - 90' x 140'
Front & rear yard - 25'
Side yards - 9'
R2 District
Lot size - 90' x 140'
Front & rear yard - 25'
Side yards - 5'
R3 District
Lot size 90' x 140'
Front & rear yard - 25'
Side yards - 5'
TC District
Lot size - 3,000 sq. feet - single trailer
5,000 sq. feet - double trailer
Front & rear yards - 20' feet
Side yards - 10 feet
C1 District
Lot size 35' x 35'
Front & rear yard - none
Side yards - none
M1 District
Lot size - 60' x 100'
Front & rear yards - 25' front yard
Side yards - none
SECTION 18. Parking Requirements. The following shall be the number of off street parking spaces required for each respective district. A parking space shall be an area at least 9' wide and 20' long connected to a public street or alley by driveway not less than 10' wide and so arranged as to permit ingress and egress of the automobile parked adjacent to the parking space.
R1 District - 2 spaces per lot
R2, R3 Districts - 1\( \frac{1}{2} \) space per dwelling unit
C1 District - 1 space per 1,000 foot of lot.
In addition, said parking spaces shall be of a hard surface of either blacktop or concrete.
M1 District - 1 space per 1,000 sq. feet of building space. In addition, said parking spaces shall be of a hard surface of either blacktop or concrete.
TC District - 1 space per lot
Sources
- laserfiche: Ordinances-1979-83 (Ordinances-1979-83.pdf) — where it was found ↗ first seen Oct 12, 2026
Data last updated October 15, 2026. Built from the archive's documents; see how the data is built.