Chapter 135: Street Use And Maintenance

§ 135.13 Installation Or Replacement Of Culverts

The text in force on August 11, 2010, and every version since 2010.

Unofficial compilation built from the City's published 2010 Code chapters and the text of adopted ordinances. Effective dates are inferred from adoption records; scanned chapters were OCR'd. The City of Tiffin's adopted Code of Ordinances governs. Not legal advice.

Back to today

135.13 INSTALLATION OR REPLACEMENT OF CULVERTS

1. Application. Tiffin property owners must apply, in writing, for permission to install any new culverts or replace any existing culverts. Said application must be accompanied by a drawing that shows: (i) the proposed new or replacement culvert’s dimensions, including diameter and length; (ii) its location to any affected property lines; (iii) its location to the edge of any street pavements; and (iv) any other information the City Engineer or Public Works Director may request. Applications submitted without said drawing will be automatically denied.

2. Requirements. All new and replacement culverts:

A. Must have a minimum diameter of 12 inches.

B. Must be constructed of either 2000D strength reinforced concrete pipe (RCP) or 10 gauge corrugated metal pipe (CMP).

3. Approval. All applications for new or replacement culverts will be either approved or denied, in writing, by the City Engineer. The City Engineer shall have the right to request a larger diameter culvert, a longer culvert, or any variations in the proposed bury depth, cover material, or alignment of culverts.

4. Installation Notification. The Public Works Director must be notified 24 hours in advance of any installation of a culvert. The Public Works Director may, at his/her discretion, determine if an on-site inspection will be required.

5. Violations. If a culvert is replaced or installed without approval, found to be constructed of any unapproved material, or fails to meet any request of the City Engineer, it shall be removed by the City. The costs incurred by the City to remove any culvert shall be assessed to the property owner who is determined by the City to be in violation of this chapter.

6. Liability. No City personnel, including the City Engineer or Public Works Director, will install or replace any culvert on private property. The City will not be responsible for the procurement of any contractors or suppliers. Property owners will be liable for any damages to ditches, street surfaces, sidewalks, municipal utilities, private utilities, and neighboring properties.

2010 Code (city website file), in force from August 11, 2010 · source page

Confirmed by the city's current text: the 2026 draft recodification (August 2026, not adopted) has the same words (§ 135.13, p. 276), apart from minor wording.

In the 2026 draft (a comparison with a draft, not adopted): § 135.13 — wording changed, minor wording · compare

History

FromToSourceHowDocument
Aug 11, 2010today 2010 Code base text · text p. 3

Dates: an Iowa ordinance takes effect when it is published after adoption. Where the clerk's certificate records the publication date it is used; otherwise the adoption date stands in for it. "Not yet consolidated" means the ordinance amends this section but its new text has not been checked into this compilation yet: read the ordinance.

Back to the chapter

Data last updated October 22, 2026. Built from the archive's documents; see how the data is built.