Page 1 of 4
Text from the PDF text layer; check the PDF for anything that matters. CHAPTER 97
USE OF PUBLIC SEWERS
97.01 Storm Water 97.05 Restricted Discharges – Powers
97.02 Surface Waters Exception 97.06 Special Facilities
97.03 Prohibited Discharges 97.07 Control Manholes
97.04 Restricted Discharges 97.08 Testing of Wastes
97.01 STORM WATER. No person shall discharge or cause to be discharged any storm water, surface
water, groundwater, roof run-off, sub-surface drainage, uncontaminated cooling water, or unpolluted
industrial process waters to any sanitary sewer. Storm water and all other unpolluted drainage shall be
discharged to such sewers as are specifically designated as combined sewers or storm sewers, or to a
natural outlet approved by the Superintendent. Industrial cooling water or unpolluted process waters may
be discharged on approval of the Superintendent, to a storm sewer, combined sewer, or natural outlet.
97.02 SURFACE WATERS EXCEPTION. Special permits for discharging surface waters to a public
sanitary sewer may be issued by the Council upon recommendation of the Superintendent where such
discharge is deemed necessary or advisable for purposes of flushing, but any permit so issued shall be
subject to revocation at any time when deemed to the best interests of the sewer system.
97.03 PROHIBITED DISCHARGES. No person shall discharge or cause to be discharged any of the
following described waters or wastes to any public sewers:
1. Flammable or Explosive Material. Any gasoline, benzene, naphtha, fuel oil, or other
flammable or explosive liquid, solid, or gas.
2. Toxic or Poisonous Materials. Any waters or wastes containing toxic or poisonous
solids, liquids or gases in sufficient quantity, either singly or by interaction with other wastes, to
injure or interfere with any sewage treatment process, constitute a hazard to humans or animals,
create a public nuisance, or create any hazard in the receiving waters of the sewage treatment
plant, including but not limited to cyanides in excess of two (2) milligrams per liter as CN in the
wastes as discharged to the public sewer.
3. Corrosive Wastes. Any waters or wastes having a pH lower than 5.5 or having any other
corrosive property capable of causing damage or hazard to structures, equipment, and personnel
of the sewage works.
4. Solid or Viscous Substances. Solid or viscous substances in quantities or of such size
capable of causing obstruction to the flow in sewers, or other interference with the proper
operation of the sewage works such as, but not limited to, ashes, cinders, sand, mud, straw,
shavings, metal, glass, rags, feathers, tar, plastics, wood, unground garbage, whole blood, paunch
manure, hair and fleshings, entrails and paper dishes, cups, milk containers, etc., either whole or
ground by garbage grinders.
5. Excessive B.O.D., Solids or Flow. Any waters or wastes having (a) a five-day
biochemical oxygen demand greater than 300 parts per million by weight, or (b) containing more
than 350 parts per million by weight of suspended solids, or (c) having an average daily flow
greater than two percent of the average sewage flow of the City, shall be subject to the review of
the Superintendent. Where necessary in the opinion of the Superintendent, the owner shall
provide, at the owner’s expense, such preliminary treatment as may be necessary to (a) reduce the
biochemical oxygen demand to 300 parts per million by weight, or (b) reduce the suspended
Sources
- citycode: Chapter 97 – Use Of Public Sewers (chapter-97.pdf) — where it was found ↗ first seen Oct 12, 2026
Data last updated October 15, 2026. Built from the archive's documents; see how the data is built.