Ordinances-1998-218

C) The size and shape of lots intended for commercial or industrial use shall be adequate to provide for the use intended, and to meet the parking, loading, and other requirements for such uses contained in the zoning ordinance. D) Lot arrangement and design shall be such that all lots will provide satisfactory building sites, properly related to topography and surrounding land uses. E) All lots shall comply with all requirements of the zoning ordinance applicable to the zone in which the lot is located. F) All lots shall abut a public street or an approved private street. G) Unless unavoidable, lots shall not front, or have direct access to arterial streets. Where unavoidable, lots shall be so arranged as to minimize the number of access points. H) All lot lines shall be at right angles to straight street lines or radial to curved street lines, except where, in the judgment of the City Council, a waiver of this provision will provide a better street and lot layout. I) Reversed frontage lots are prohibited. Double frontage lots shall only be permitted where abutting a major street and a minor street, and such lots shall front only on minor streets. 4.08 PARKS AND OPEN SPACE All subdivisions should be so designed as to meet the neighborhood park and open space needs of their residents. The following standards and procedures will be used to determine the park and open space requirements for all proposed developments or subdivisions greater than 1/2 acre in size within the City of Tiffin: