Ordinances-1996-205

'attachments,' as set forth in this ordinance. Except for a final plat for a minor subdivision as set forth herein, no final plat shall be considered by the City Council until and unless a preliminary plat for the area included in the proposed final plat has been approved and has not expired and become void as set forth above. Copies of the Final Plat shall be distributed to the City Engineer and the City Attorney for their review, and upon completion of same, the City Engineer and City Attorney shall report the findings of their review to the City Council, for its consideration regarding acceptance of the Final Plat by resolution. All resolutions approving final plats shall be recorded by the subdivider, with copies of the recorded documents to be provided to the City Attorney. The final plat shall be drawn at a scale of one inch equals one hundred feet (1" = 100') or larger. Sheet size shall be no greater than eighteen inches by twenty-four inches (18" x 24") nor smaller than eight and one-half inches by eleven inches (8-1/2" x 11") and shall be of a size acceptable to the County Auditor. If more than one sheet is used, each sheet shall clearly show the number of the sheet, the total number of sheets included in the plat, and match lines indicating where other sheets adjoin. The final plat shall be clearly marked "Final Plat" and shall show the following: A) The name of the subdivision; B) Name and address of the owner and subdivider; C) Scale, and a graphic bar scale, north arrow and date on each sheet. D) All monuments to be of record; as required by Chapter 355, Code of Iowa. E) Sufficient survey data to positively describe the bounds of every lot, block, street, easement, or other area shown on the