ordinance
Ordinances-1995-197
Page 31 of 40
Text read by the vision model; check the PDF for anything that matters.C) The name and address of the owner and the name, address and profession of the person preparing the plan.
D) A key map showing the general location of the proposed subdivision in relation to surrounding development.
E) The names and locations of adjacent subdivisions and the names of record owners and location of adjoining parcels of unplatted land. A list of all owners of record of property located within two hundred (200) feet of the subdivision boundary shall be attached.
F) The location of property lines, streets and alleys, easements, buildings, utilities, watercourses, tree masses, and other existing features affecting the plat.
G) Existing and proposed zoning of the proposed subdivision and adjoining property.
H) Contours at vertical intervals of not more than two (2) feet if the general slope of the site is less than ten (10) percent and at vertical intervals of not more than five (5) feet if the general slope is ten (10) percent or greater.
I) The legal description of the area being platted.
J) The boundary of the area being platted, shown as a dark line with the approximate length of boundary lines and the approximate location of the property in reference to known section lines.
K) The layout, numbers and approximate dimensions of proposed lots.
L) The location, width and dimensions of all streets and alleys proposed to be dedicated for public use.
M) The proposed names for all streets in the area being platted.
N) Present and proposed utility systems, including sanitary and storm sewers, other drainage facilities, water lines, gas mains, electric utilities, cable utilities,
Sources
- laserfiche: Ordinances-1995-197 (Ordinances-1995-197.pdf) — where it was found ↗ first seen Oct 12, 2026
Data last updated October 16, 2026. Built from the archive's documents; see how the data is built.