resolution
Resolutions-2006-046
Page 1 of 2
Text read by the vision model; check the PDF for anything that matters.CITY OF TIFFIN IOWA RESOLUTION NO 2006-46
A RESOLUTION AMENDING CITY DESIGN STANDARDS SECTION 7.H.5 REGARDING APPROVED WATER SERVICE LINE MATERIALS
WHEREAS, the City of Tiffin, Johnson County, Iowa desires to amend the City of Tiffin Design Standards,
NOW, THEREFORE, BE IT RESOLVED, by the City of Council of Tiffin, Iowa, that it hereby amends the City of Tiffin Design Standards by removing Section 7.H.5 and replacing it to read as follows:
Service pipe must be either seamless annealed copper, Type K conforming to ASTM B-88 or P.E. 3408 as defined in current ASTM D2239 and AWWA C901 P.E. 200 psi. rated pipe. See Figure 7.3 for typical water service installation.
ON THE 8th day of November, 2006 at a regular meeting of the Tiffin City Council, Tiffin, Iowa, Councilperson Dils introduced, A RESOLUTION AMENDING CITY DESIGN STANDARDS SECTION 7.H.5 REGARDING APPROVED WATER SERVICE LINE MATERIALS, and made a motion for approval. The motion was seconded by Councilperson Wright.
Ayes: Wright, Petersen, Demuth, Dils, and Bartels
Nays: None
Motion carried
WHEREUPON, Mayor Glenn R. Potter declared that the RESOLUTION AMENDING CITY DESIGN STANDARDS SECTION 7.H.5 REGARDING APPROVED WATER SERVICE LINE MATERIALS, be adopted and signified his approval of the same by affixing his signature thereto.
PASSED, by the council on the 8th day of November, 2006 and approved by the Mayor on the 8th day of November, 2006
CITY OF TIFFIN
By: Glenn R. Potter, Mayor
ATTEST:
Margaret B. Reilman, City Clerk
Sources
- laserfiche: Resolutions-2006-046 (Resolutions-2006-046.pdf) — where it was found ↗ first seen Oct 12, 2026
Data last updated October 15, 2026. Built from the archive's documents; see how the data is built.